send inquiry
Home » Products » Surface Roughness » Surface Roughness

Surface Roughness

Surface Roughness
Surface Roughness
Send Inquiry
Product Code : MR 200
Product Description

Surface Roughness

 The MR200 surfaces roughness measure instrument is suitable for shop floor use and mobile measure to need of a small handheld instrument, it operation simple, function overall, measure fast, accuracy stability, take convenience.The SR200 Roughness is capable of evaluating surface textures with a variety of parameters according to various national standards and international standard.The measurement results are displayed digital/graphically on the LCD,and output to the printer.

Measurement principle

When measuring surface roughness of part surface, the pickup is placed on the surface of the part and then tracing the surface at constant rate. The pickup acquires the surface roughness by the sharp stylus in pickup. The surface roughness causes displacement of pickup which results in change of inductive value of induction coils thus generate analogue signal which is in proportion to surface roughness at output end of phase-sensitive rectifier. This signal enters data collection system after amplification and level conversion. After that, those collected data are processed with digital filtering and parameter calculation by DSP chip and the measuring result can be read on LCD, printed through printer and communicated with PC.



  • 15 parameters: RaRqRzRtRpRvRSRSm Rz(JIS)Ry(JIS) RSkR3zRmaxRPcRmr
  • High accuracy inductance pickup;
  • Four filtering methods of RC, PC-RC, GAUSS and D-P;
  • Compatible with four standards of ISO, DIN, ANSI and JIS; 
  • Can store 15 sets of measurements results
  • 128×64 dot matrix LCD displays all parameters and graphs;
  • DSP chip is used to control and process data with high speed and low power consumption;
  • Built-in lithium ion chargeable battery and control circuit have high capacity, without memory effect. Consecutive work time is longer than 20 hours;
  • Design of mechanical and electrical integration is adopted to achieve small bulk, light weight and easy usage;
  • Can be connected to printer to print all parameters and graphs;
  • Built-in standard RS232 interface enables communication with PC;
  • Automatic switch off, memory and various prompt instructions;
  • Optional printer, analysis software and measurement platform.



contact details
Shop No:5, A-Wing, Building Kinjal La-Vista, Poonam Sagar Complex, Mira Road (E), Mira Bhayandar - 401107, Maharashtra, India
Mr. V K Kolwankar (Director)
Mobile : +918068213941
Mr. Anthony Jayakar (Sales Manager)
Mobile : +918068213941
Phone : +918068213941
Fax : 91-22-28128507
send inquiry   
NAVTEK INSTRUMENTS (INDIA) PVT. LTD. All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.